Patch cord WENTRONIC Digitus DK-1644-100 10 m Cat6 S/FTP RJ-45

Shielded patch cord WENTRONIC Digitus DK-1644-100 10 m Cat6 S/FTP with RJ-45 connectors provides a 10-metre copper connection for Gigabit Ethernet networks. The cable construction uses individually foil-shielded pairs plus an overall braided shield (S/FTP) to reduce electromagnetic interference and crosstalk, ensuring stable high-speed data transmission in environments with potential signal disturbance. The RJ-45 plugs are precision-terminated for reliable contact with network ports and switches.

Advantages

The S/FTP design combines pair-level foil shielding with an overall braid to minimize both near-end and far-end crosstalk while offering improved protection against external EMI. A 10 m length gives flexibility for office and server-room layouts without the need for intermediate patch panels. Cat6 performance supports Gigabit Ethernet and provides headroom for applications requiring up to 250 MHz bandwidth. The cable is suitable for shielded network infrastructures and reduces the likelihood of packet loss or retransmission caused by interference.

Suitable for

• Wired office networks connecting desktops, switches and VoIP phones
• Server rooms and data cabinets requiring shielded cabling
• Home networks where reduced interference and reliable Gigabit speed are needed
• Environments with nearby electrical equipment or cable bundles that can cause EMI

Key specifications

• Category: Cat6, suitable for up to 250 MHz
• Shielding: S/FTP — foil shield on each pair plus overall braided shield
• Connectors: RJ-45 plugs on both ends with standard 8P8C termination
• Length: 10 metres
• Conductor: solid or stranded copper conductors (network-grade)
• Data rates: supports Gigabit Ethernet (1000BASE-T)
• Impedance: 100 Ω characteristic impedance

How to use

Plug one RJ-45 connector into the network port of the device (PC, switch, router or patch panel) and the other connector into the corresponding port at the other end. Ensure connectors are fully seated and that the cable is not kinked or sharply bent near the termination points. For best performance, avoid routing the cable parallel to power lines and keep it away from large sources of electromagnetic interference. Use shielded ports and grounding where the network design requires shield continuity.

Usage recommendations

Inspect connectors before installation and avoid excessive bending or pulling on the cable. When deploying in shielded network environments, ensure proper grounding of shields at specified termination points to maintain EMI protection. Replace the cable if physical damage to the jacket or connectors is visible.