Hand Wire Brush Wolfcraft WF2725000 — 3-row brass wire, 200 mm

Wolfcraft hand wire brush WF2725000 features three rows of brass wire and a 200 mm working width designed for manual surface cleaning and light metal finishing. The brush is intended for removing rust, paint residues and burrs, and for preparing surfaces prior to welding, painting or restoration. The brass wires reduce the risk of scratching on softer, non-ferrous metals while maintaining sufficient abrasion for effective cleaning.

Advantages

The three-row brass-wire construction combines durability with gentler contact on delicate metals, providing consistent surface contact across a 200 mm width. The hand-held format gives precise control for targeted cleaning and deburring tasks. Brass filaments resist corrosion and are less likely to generate sparks than steel, making the brush suitable for work on copper, brass, aluminium and painted surfaces where minimal scratching is required.

Suitable for

• Manual removal of rust and loose paint from metal surfaces
• Deburring thin metal sheets and components
• Surface preparation before painting, welding or adhesive bonding
• Light finishing and cleaning of softer non-ferrous metals (e.g., brass, copper, aluminium)
• Restoration and maintenance of metal fixtures and fittings

Key specifications

• Brush type: hand wire brush with three rows of brass wire
• Working width: 200 mm
• Wire material: brass filaments for reduced scratching
• Application: manual surface cleaning, rust and paint removal, deburring, light finishing
• Suitable materials: non-ferrous metals and painted surfaces

How to use

Hold the brush firmly by its handle and apply steady, even pressure while moving the brush along the surface in the direction that best removes corrosion or paint. Use multiple gentle passes rather than excessive force to avoid deformation of thinner materials. For corners and tight areas, angle the brush to reach edges and seams. After brushing, remove residue with a cloth or compressed air and inspect the surface for remaining contaminants prior to painting or welding.

Usage recommendations

For optimal results, use the brass wire brush on dry surfaces and avoid heavy pressure on thin or fragile metal parts. Wear appropriate personal protective equipment such as safety glasses and gloves. Test the brush on an inconspicuous area if surface appearance is critical. Clean and store the brush in a dry place to preserve filament condition.