Submersible water pump Yato YT-85330 — 400 W, 11,000 l/h, max head 5.8 m, PVC housing, IPX8

Yato YT-85330 is a submersible water pump with a 400 W AC motor (220–240 V) designed for pond maintenance, water transfer and basic water-supply tasks. The pump delivers up to 11,000 l/h at a maximum delivery head of 5.8 m and offers suction capability to around 7 m. Its PVC housing and compact footprint (300 mm height, 170 mm diameter) make it suitable for confined installations where continuous underwater operation is required; the pump carries an IPX8 rating for prolonged submersion.

Advantages

The Yato YT-85330 combines relatively high flow capacity with a moderate power rating so it can move large volumes of water while remaining energy-efficient for its class. The PVC construction provides corrosion resistance and lower weight compared with metal-bodied pumps, contributing to a total mass of approximately 3.8 kg and simplifying handling and installation. The sealed design and IPX8 rating support continuous submerged use, and the vertical compact form factor facilitates placement in ponds, sumps or tanks with limited space.

Suitable for

• Pond circulation and small waterfall features
• Emptying or filling water tanks, cisterns and sumps
• Water transfer for garden irrigation and rainwater reuse
• Basic water treatment and filtration systems where moderate head is required

Key specifications

• Motor power: 400 W (AC, 220–240 V)
• Maximum flow rate: up to 11,000 litres per hour
• Maximum delivery head: 5.8 metres
• Maximum suction capability: approximately 7 metres
• Housing material: PVC
• Protection rating: IPX8 for continuous submersion
• Dimensions: height 300 mm, diameter 170 mm
• Weight: approx. 3.8 kg

How to use

Install the pump fully submerged in clean or mildly contaminated water, ensuring the inlet is unobstructed and the pump rests on a stable, level base. Connect the power supply to a properly grounded outlet that matches the pump's rated voltage (220–240 V). Use appropriate hoses or rigid piping for the outlet, secure connections to avoid leaks, and verify that the system's flow direction and head do not exceed the pump's specified values. Regularly inspect the intake area for debris and clear blockages to maintain performance. Disconnect power before performing any maintenance or handling the pump.

Usage recommendations

For prolonged service life, avoid running the pump dry, operate within the specified head and flow limits, and protect the power cable and electrical connections from mechanical damage and water ingress. When used in outdoor ponds or open tanks, consider a pre-filter or strainer to reduce large-particle intake and schedule periodic inspections to remove accumulated debris from the pump inlet.