Water pump YATO YT-85341, 750 W, 11,000 l/h, stainless steel housing, max head 7 m, IPX8

Submersible water pump YATO YT-85341 is a compact, high-capacity pump designed for water transfer, drainage and supply tasks. Equipped with a 750 W alternating current motor and a stainless steel housing, the unit supports continuous immersion under IPX8 protection. It provides a maximum flow rate of 11,000 l/h and a maximum delivery head of 7 m, with an 8.5 m maximum suction height suitable for many domestic and light commercial applications.

Advantages

The stainless steel housing delivers corrosion resistance and enhanced mechanical durability while the 750 W motor balances power and energy consumption for frequent use. IPX8 rating permits continuous submersion, reducing risk during prolonged operation in flooded areas or tanks. Compact dimensions and straightforward outlet connection make the pump easy to install and reposition for a variety of tasks.

Suitable for

• Draining flooded basements, cellars and garages
• Transferring water between tanks or containers
• Irrigation and garden watering where high flow is required
• Supplying water to temporary installations and construction sites
• Emergency water removal in light commercial settings

Key specifications

• Motor power: 750 W
• Maximum flow rate: 11,000 liters per hour
• Maximum delivery head: 7 meters
• Maximum suction height: 8.5 meters
• Housing material: stainless steel
• Ingress protection: IPX8 (suitable for continuous submersion)

How to use

Place the pump fully submerged in clean or slightly dirty water on a stable surface. Connect appropriate discharge hose or pipe to the outlet and secure fittings to avoid leaks. Ensure the power supply matches local mains specifications and use a properly grounded outlet. Switch on the pump and monitor initial operation to confirm steady flow and correct orientation. For intermittent transfers, allow the pump to run until the required water level is reached; for continuous return-to-tank or drainage tasks, check periodically for debris that could affect performance.

Usage recommendations

Use a strainer or pre-filter when pumping water with visible particulates to reduce the risk of clogging. Avoid running the pump dry. Regularly inspect seals and connections and clear any accumulated debris from the intake area to maintain maximum flow and service life.