Putty Bripox Poxylina 250 g / 155 ml — Bripox two-component epoxy putty

Bripox Poxylina is a two-component epoxy putty supplied as a 250 g (155 ml) kit designed for repairs, bonding and structural patching. The product combines a resin and a hardener that, when mixed, form a durable, machinable compound with good adhesion to metal, wood, ceramics and many plastics. It cures to a hard, sandable and paintable finish suitable for industrial maintenance and household repair tasks.

Advantages

Bripox Poxylina offers a balance of high adhesion and mechanical strength while remaining workable for a limited time after mixing. The cured material can be drilled, filed and sanded, enabling precise restoration and finishing. Its compatibility with a wide range of substrates and resistance to water make it suitable for sealing leaks and rebuilding damaged parts. The product arrives as a pre-measured two-component kit for consistent mixing ratios and predictable curing.

Suitable for

• Filling gaps, cracks and voids in metal, wood and ceramic surfaces
• Rebuilding worn or damaged mechanical parts and housings
• Sealing small leaks and holes in non-pressurized systems
• Bonding dissimilar materials in household and workshop repairs
• Surface restoration prior to finishing, painting or machining

Key specifications

• Form: two-component epoxy putty supplied as a kit (resin + hardener)
• Net content: 250 g (approximately 155 ml total mixed volume)
• Cured properties: machinable, sandable and paintable
• Substrate compatibility: metal, wood, ceramics and many plastics
• Typical uses: filling, rebuilding, sealing and bonding

How to use

Cut or portion the required amounts of resin and hardener according to the supplied kit ratio, then knead or mix thoroughly until a uniform colour is reached. Apply the mixed putty to clean, dry surfaces free of grease, loose rust or dust. Form and press firmly into gaps or onto damaged areas, shaping as needed before initial cure. Allow the compound to cure fully; once hardened it can be trimmed, drilled, sanded and painted to match the surrounding surface.

Usage recommendations

For best results, prepare surfaces by degreasing and roughening smooth substrates to improve adhesion. Work within the product's working time and avoid exposing the mixed putty to moisture during cure. Use protective gloves and adequate ventilation when mixing and applying. Store unused components in a cool, dry place and follow local guidelines for disposal of epoxy materials.