Contactor Eti-Polam CE07.10 230V 50/60Hz 7A 3-pole 230V AC coil 1 NO 0R (MPN 004641023)

Contactor Eti-Polam CE07.10 with a 230V AC coil is a three-pole power contactor rated for 7 A and compatible with 50/60 Hz supply. It provides a single normally open contact (1 NO) and is intended for switching and control tasks in industrial and commercial electrical panels. The compact design allows integration into control circuits for lighting, motors and resistive loads where a 3-pole switching element is required.

Advantages

The contactor combines a straightforward mechanical design with standard 230V AC coil operation, making it suitable for common control systems. Its three-pole configuration enables simultaneous switching of three conductors, and the single normally open contact simplifies wiring for basic on/off control. Rated current and frequency compatibility support use in typical 50/60 Hz installations, while the device's construction is designed for panel mounting and straightforward integration into existing switchgear.

Suitable for

• Switching lighting circuits in commercial and industrial panels
• Controlling small to medium single-phase motors and motor circuits
• Switching resistive loads such as heaters or ovens
• Use as a control element in automation and relay logic schemes

When it may not be suitable

This contactor is rated for 7 A; it may not be appropriate for high-current motors, large three-phase motors, or applications that require higher continuous current ratings. It is designed for use with a 230V AC control supply; systems requiring DC coils or different coil voltages will need a different model. For switching of inductive loads with significant inrush currents, additional protection or a contactor with a higher rated current should be considered.

Key specifications

• Poles: 3 (three-pole contactor)
• Coil voltage: 230 V AC
• Rated current: 7 A
• Frequency: 50/60 Hz compatible
• Contact configuration: 1 normally open (1 NO)
• Mounting: panel / DIN-rail compatible housing (device intended for electrical panel installation)

How to use

Install the contactor in an appropriate electrical panel or enclosure following local electrical codes. Connect the supply/control wires to the coil terminals rated for 230 V AC and wire the three load conductors through the main contact poles. Ensure correct tightening of terminal connections and verify the control circuit supplies the correct voltage and frequency. Use appropriate overload protection and auxiliary devices (such as thermal relays or fuses) when switching motors or inductive loads. After installation, test the contactor operation under no-load conditions before applying normal load.

What to consider before purchase

• Verify the rated current (7 A) matches the intended load and consider inrush currents for motors or inductive loads
• Confirm the coil control voltage is 230 V AC and compatible with your control circuit
• Ensure the 1 NO contact configuration meets your switching requirements
• Check mounting space and panel compatibility for a three-pole contactor

Usage recommendations

Use appropriate overload and short-circuit protection sized for the load, and consider adding snubbers or RC suppression when switching inductive loads. Perform regular visual inspections and contact resistance checks in preventive maintenance schedules to ensure reliable operation.