Leave your address - as soon as the price of the product goes down, you'll know about it right away
Ceramic Glue Sticks Megatec 11 mm x 200 mm milky 5 pcs (BN1621 111 CM)
Ceramic Glue Sticks Megatec 11 mm x 200 mm milky 5 pcs (BN1621 111 CM)
In cart {{totalProductsCount}} item(s)
Your cart is empty
Ceramic Glue Sticks Megatec 11 mm x 200 mm milky 5 pcs (BN1621 111 CM)
Leave your address - as soon as the price of the product goes down, you'll know about it right away
Ceramic Glue Sticks Megatec 11 mm x 200 mm milky 5 pcs (BN1621 111 CM)
Ceramic Glue Sticks Megatec 11 mm x 200 mm milky 5 pcs (BN1621 111 CM)
Megatec ceramic glue sticks, 11 mm diameter and 200 mm length, milky finish, pack of 5 are formulated for use with hot-melt glue guns that accept 11 mm sticks. These sticks are intended for bonding ceramic parts, small repairs and hobby projects where a translucent, milky bond is acceptable. The solid composition provides quick tack and moderate bond strength on ceramic surfaces and other non-porous materials commonly encountered in indoor repair and assembly tasks.
The milky appearance gives a less conspicuous joint compared with opaque adhesives while retaining the workability and fast setting characteristics of hot-melt sticks. Their 11 mm diameter and 200 mm length match common glue gun feed mechanisms for steady melting and application. Packaged as five rods, the set offers multiple repair or craft applications without immediate need for replenishment.
Insert an 11 mm stick into a compatible hot-melt glue gun and allow the gun to reach operating temperature according to the manufacturer's instructions. Apply molten adhesive to one of the surfaces to be joined, press the parts together while the glue is still tacky and hold in position until sufficient set is achieved. For ceramic repairs, ensure surfaces are clean and free of dust or grease before applying glue. Cut or trim excess solidified adhesive after cooling if needed.
Use in well-ventilated indoor environments and avoid skin contact with molten glue. For load-bearing or high-temperature applications, test bond suitability first or select a dedicated structural adhesive. Store sticks in a cool, dry place to preserve handling properties.
{{highlightedFeature.featureTitle}}:
{{getProductFeatureValueById(product, highlightedFeature.featureId)}}