RJ-45 Wire Connector MetzConnect 1401505012-E, Black, Modular Ethernet Coupler

MetzConnect 1401505012-E is a black RJ-45 wire connector designed as a modular Ethernet coupler for Category-compliant cabling. It provides a compact inline coupling solution for 8P8C network plugs, enabling extension, panel connection or repair of Ethernet runs. The connector supports multi-port Cat.6 class EA performance and is compatible with 10 GBit Ethernet, remote powering standards (PoE, PoE+ and UPoE) and HDBaseT applications.

Advantages

The coupler meets Class EA requirements to ISO/IEC 11801 Ed.2.2:2011-06 and DIN EN 50173-1:2011-09, ensuring performance for high-speed networks. It accepts a range of conductor types and diameters, including solid and stranded copper conductors, and supports AWG 27/7 through AWG 24/1 connections. Crimp contacts and shield can be connected in a single crimping step, simplifying installation and reducing assembly time. Optional bend protection and trumpet-shaped strain relief improve cable routing and mechanical longevity.

Suitable for

• Inline extension of Ethernet cables in patching or temporary installations
• Integration into patch panels and keystone housings for network cabinets
• Field repairs or replacements of damaged RJ-45 terminations
• High-speed 10 GBit Ethernet links and PoE/PoE+/UPoE powered devices
• HDBaseT signal transmission and testing on protected jacks

Key specifications

• Compatibility: 8P8C (RJ-45) modular Ethernet coupler
• Performance class: Cat.6 class EA (compliant to Class EA standards)
• Standards compliance: ISO/IEC 11801 Ed.2.2 and DIN EN 50173-1
• Data rate: suitable for 10 GBit Ethernet (IEEE 802.3an)
• Power: supports Remote Powering (PoE, PoE+ and UPoE)
• Connection types: supports crimp contacts and shield connected in one step
• AWG support: AWG 27/7 to AWG 24/1 and AWG 26/1 to AWG 24/1 variants
• Solid conductor diameter: 0.36–0.51 mm
• Stranded conductor diameter: 0.46–0.61 mm
• Conductor overall diameter: 0.85–1.05 mm
• Cable jacket max diameter: up to 7.3 mm
• Bend protection: available in variants with trumpet-shaped strain relief; colored options available
• Use as test plug: compatible with IP67 protected jacks of certain variants

How to use

Prepare the Ethernet cable by stripping the jacket to expose conductors according to the connector's specified dimensions. Insert crimp contacts and, where applicable, the shield into the connector body and perform the crimping operation so contacts and shield are secured in a single step. If using the variant with bend protection, fit the trumpet-shaped strain relief over the cable end before completing the crimp. Once assembled, plug the coupler into the corresponding 8P8C plug or jack to create an inline connection or mount it into a keystone housing or panel opening as required.

Usage recommendations

For reliable 10 GBit performance and PoE operation, use cables and terminations that match the specified conductor diameters and AWG ranges. Use a dedicated crimping tool designed for the connector to ensure correct contact and shield termination. Choose the bend-protection variant when routing cables in constrained or high-stress environments to reduce mechanical strain and extend service life.