Adhesive Pattex PCL6C liquid, recommended application temperature from 18 °C

Pattex PCL6C liquid adhesive is a pourable bonding solution from Pattex formulated for applications that require a low minimum application temperature. Supplied as a liquid, this adhesive is designed to be used at ambient and controlled conditions where the minimum recommended application temperature is 18 °C. The product is intended for general-purpose joining tasks where a liquid formulation and predictable handling at or above the specified temperature are required.

Advantages

Pattex PCL6C provides reliable wetting and contact on a variety of common substrates when used within the recommended temperature range. The liquid formulation ensures even application and good surface coverage, while the defined minimum application temperature of 18 °C supports predictable curing and bond formation in cooler environments compared with adhesives that need higher temperatures. The product is suitable for tasks that demand a pourable adhesive with controlled ambient handling characteristics.

Подходит для

• Общих соединительных работ в помещениях с контролируемой температурой от 18 °C
• Стыковки деталей из материалов, совместимых с жидкими адгезивами (перед применением провести тест на совместимость)
• Ремонтных работ и мелких монтажных задач, где требуется равномерное нанесение клея
• Производственных процессов с использованием жидких адгезивов и контролируемых условий нанесения

Key specifications

• Formulation: liquid adhesive suitable for pourable application
• Recommended minimum application temperature: 18 °C
• Typical use: general-purpose bonding where a liquid formulation is required
• Handling: requires ambient or controlled temperature during application to maintain recommended viscosity and performance
• Appearance: pourable liquid at recommended application temperature

How to use

Ensure the working environment and adhesive temperature are at or above 18 °C before use. Prepare bonding surfaces by cleaning and degreasing to remove dust, oil and contaminants that could impair adhesion. Dispense the adhesive in a controlled manner appropriate to the task—by pouring, dosing equipment or manual application tools—ensuring even coverage on one or both mating surfaces as required. Join the parts, apply appropriate pressure if necessary, and allow the adhesive to cure or set according to ambient conditions and the substrate materials. Follow standard safety and handling instructions for liquid adhesives.

Usage recommendations

Perform a preliminary compatibility and performance test on the actual substrates and under the intended ambient conditions (minimum 18 °C) to confirm bond strength and curing behaviour. Use appropriate personal protective equipment, ensure adequate ventilation during application, and store the product in a cool, dry place away from direct heat and freezing conditions to preserve performance.