Adhesive Pattex PCL3C Polychloroprene liquid 50 g, tube, drying 15 min, use 18–25 °C

Pattex PCL3C Polychloroprene liquid adhesive in a 50 g tube is a solvent-based contact adhesive formulated for bonding a wide range of materials. The product is supplied in a squeezable tube for controlled application and is designed to dry in approximately 15 minutes under recommended conditions. Intended for indoor use at ambient temperatures between 18 and 25 °C, this polychloroprene adhesive provides an immediate tack after drying, enabling fast assembly and repair work where a strong initial bond is required.

Advantages

This polychloroprene adhesive combines rapid drying time with good initial tack and solvent-based adhesion properties suitable for many substrates. The 50 g tube format allows precise dispensing and reduces waste for small repair and assembly tasks. The adhesive performs reliably within the specified temperature range and provides a consistent bond strength for typical contact-adhesive applications.

Suitable for

• Bonding rubber to metal, leather, textiles and many plastics
• Small repairs of shoes, bags and upholstery
• General assembly tasks requiring a fast-setting contact adhesive
• Fixing trims, seals and edged components

Key specifications

• Form: solvent-based polychloroprene liquid adhesive
• Packaging: 50 g tube dispenser for controlled application
• Drying time: approximately 15 minutes under recommended conditions
• Recommended application temperature: 18–25 °C
• Application type: contact adhesive providing immediate tack after drying

How to use

Ensure surfaces are clean, dry and free of grease, dust and loose particles. Apply an even coat of the adhesive from the tube to both surfaces to be bonded. Allow the applied adhesive to dry for about 15 minutes at 18–25 °C until it becomes tacky to the touch. Align the parts accurately and press firmly together to achieve full contact. Hold or clamp if necessary until the bond sets. Follow ventilation recommendations for solvent-based products during application and drying.

Usage recommendations

Use in a well-ventilated area and avoid application outside the recommended temperature range. Test adhesion on a small area when bonding unfamiliar materials or plastics sensitive to solvents. Store the tube capped and away from direct heat sources to maintain product performance.