Equipotential Bonding Busbar Pokój SWP-G2 A14-6208 for Electrical Earthing Systems

Equipotential bonding busbar Pokój SWP-G2 A14-6208 is a compact conductor assembly designed to create a common equipotential point in electrical installations. It is intended for connecting protective conductors, protective earth terminals, and bonding straps to ensure continuity of earthing and to reduce potential differences that may appear between conductive parts. The busbar is suitable for installation inside distribution boards, consumer units and electrical panels in residential, commercial or light industrial environments.

Advantages

The Pokój SWP-G2 busbar provides a stable and low-resistance connection point for multiple protective conductors, with a design that facilitates neat wiring and easy identification of bonding points. Its construction supports secure mechanical and electrical connections, helping to maintain continuity under normal operating conditions and during maintenance. The product is compact, allowing integration into crowded enclosures while keeping clearances and accessibility for testing and inspection.

Suitable for

• Creating a common equipotential bonding point in residential distribution boards
• Bonding protective conductors and earth terminals in commercial installations
• Centralizing earthing connections in light industrial panels and service cabinets
• Use where multiple conductors need to be joined to a single, accessible earthing point

When it may not be suitable

This busbar is intended for use as an internal bonding component inside enclosures and may not be suitable where full external environmental protection or IP-rated housings are required; in such cases a specifically rated external earthing bar or enclosure should be selected. For installations requiring unusually large conductor cross-sections or very high fault current ratings, a larger or specially rated bonding solution should be chosen.

Key specifications

• Function: equipotential bonding / earthing connection point
• Typical mounting: DIN rail or panel mounting inside distribution boards (verify mounting method before installation)
• Material and finish: conductive metal suitable for permanent electrical connection (refer to manufacturer for exact material data)
• Connection style: multiple terminal points to accept several protective conductors and bonding straps
• Typical application environments: residential, commercial, light industrial electrical panels

How to use

Install the equipotential busbar in the designated position inside the distribution board or panel, following the enclosure's layout and maintaining required clearances. Secure the busbar mechanically according to the panel manufacturer’s guidance and ensure all mounting hardware is tightened. Connect protective earth conductors and bonding straps to the busbar terminals, using appropriately sized ferrules or crimped terminations where required. After connections are made, verify continuity and resistance with suitable test instruments, and ensure that all connections comply with local wiring regulations and earthing practices.

What to consider before purchase

• Compatibility with the enclosure size and available mounting method
• Number and size of conductors you need to connect to the common point
• Required mechanical and electrical ratings for your installation environment
• Compliance with local electrical codes and earthing regulations

Usage recommendations

Use this equipotential busbar to centralize protective earth connections and to reduce touch voltage risks. Ensure conductor terminations are clean, properly sized and torque-tightened to the manufacturer’s recommended values. Periodically inspect bonding connections as part of routine electrical maintenance to confirm continued integrity.