Construction aerosol adhesive Soudal Soudabond Easy 750 mL — Soudal brand, ready-to-use spray adhesive

Soudal Soudabond Easy 750 mL is a ready-to-use construction aerosol adhesive in a spray can designed for fast, even application on a wide range of building materials. The product delivers high initial tack and good coverage for substrates such as foam, wood, metal, many plastics and textiles, enabling temporary and permanent fixing for mounting panels, insulation, repairs and general installation tasks. The aerosol format provides controlled dispensing and is suitable for both indoor and outdoor use when applied according to surface requirements.

Advantages

The Soudal Soudabond Easy spray adhesive offers rapid bonding with high initial tack, reducing clamping or setting time. Uniform spray distribution ensures even coverage and minimizes waste, while the ready-to-use aerosol eliminates the need for mixing or additional tools. Its formulation adheres to diverse substrates including porous and non-porous materials, making it versatile for construction, insulation and craft applications.

Suitable for

• Mounting insulation panels and foam boards
• Bonding wood veneers, laminates and light boards
• Attaching metal trims and small metal parts
• Fixing textiles, carpets and upholstery components
• Quick repairs and do-it-yourself projects

When it may not be suitable

This spray adhesive may not be appropriate for load-bearing structural joints or applications requiring certified long-term structural performance. It is also not recommended for certain plastics that are sensitive to solvents; compatibility testing on an inconspicuous area is advised before full application. Surfaces must be clean, dry and free of dust, grease or loose particles to achieve proper adhesion.

Key specifications

• Form: ready-to-use aerosol spray
• Volume: 750 mL can
• Application: spray-on adhesive for porous and many non-porous substrates
• Initial tack: high (quick grab)
• Suitable for indoor and outdoor use when surfaces are prepared

How to use

Shake the can well before use. Hold the aerosol upright at the recommended distance from the surface (typically 20–30 cm) and spray an even, thin coat on one or both substrates depending on required bond strength. Allow the adhesive to become tacky for a few seconds to a short minute as indicated by surface type, then press surfaces together and apply uniform pressure to ensure contact. For heavier components, temporary support or clamping may be needed until full bond develops. After use, clear the valve by inverting the can and spraying briefly until only propellant is expelled.

What to consider before purchase

• Check compatibility with specific plastics and solvent-sensitive materials before full use
• Ensure adequate ventilation for indoor use and follow solvent safety recommendations
• Confirm the required bond strength—not intended for primary structural load-bearing joints
• Assess the amount needed based on coverage rate and project area

Usage recommendations

For best results, prepare surfaces by cleaning and drying them thoroughly, perform a small compatibility test on unfamiliar materials, apply in thin, even coats from the recommended distance, and allow short tack time before joining. Use personal protective equipment and ensure ventilation when spraying indoors.