Epoxy Adhesive Technicqll E-143 2x20ml — two-component metal repair and bonding adhesive

Technicqll E-143 epoxy adhesive in 2×20 ml cartridges is a two-component formulation designed for bonding and repairing metal parts. The product combines a resin and a hardener that, when mixed, cure to form a rigid, high-strength joint suitable for structural repairs, gap filling and permanent bonding between metal elements or between metal and other materials.

Advantages

The adhesive delivers strong mechanical strength and good adhesion to a variety of metal surfaces once properly mixed and cured. Its two-component design ensures controlled working time and reliable cure, enabling precise application and repositioning before hardening. The cartridge format with equal-volume chambers simplifies dispensing and reduces waste, while the cured material resists typical mechanical loads encountered in repairs and maintenance.

Suitable for

• Repairing broken or cracked metal components
• Bonding metal-to-metal joints in household and workshop repairs
• Filling small gaps, voids and worn areas in metal parts
• Adhering metal to other substrates such as wood, ceramics or some plastics (subject to surface preparation)
• DIY projects and general maintenance where a rigid, structural adhesive is required

Key specifications

• Two-component epoxy system (resin + hardener)
• Package volume: two cartridges of 20 ml each
• Mixing ratio: equal volumes of resin and hardener
• Viscosity suitable for gap filling and adhesive bonding
• Cures to a rigid, high-strength solid
• Applies to metal surfaces and compatible with various other substrates with proper preparation

How to use

Prepare surfaces by cleaning and degreasing to remove rust, oil or contaminants; roughen smooth metal with abrasive paper to improve mechanical adhesion. Dispense equal amounts of resin and hardener from the cartridges and mix thoroughly until uniform in color and consistency. Apply the mixed epoxy to one or both bonding surfaces, assemble parts and clamp or support until initial set. Remove excess adhesive before full cure. Observe recommended ambient temperature and avoid disturbing the joint during curing to achieve optimal strength.

Usage recommendations

Work in a well-ventilated area and use appropriate protective gloves and eye protection. For best results, follow surface preparation steps and allow full cure time before applying mechanical load. Store cartridges in a cool, dry place and use within the manufacturer’s stated shelf life.