Epoxy Adhesive Technicqll E-358 1 min clear 2 x 12 ml

Technicqll E-358 is a two-component clear epoxy adhesive supplied as two syringes of 12 ml each (2 x 12 ml). The fast-setting formula cures in approximately 1 minute and is formulated for bonding, sealing and small repairs on materials such as metal, glass, ceramics, wood and many plastics. After full curing the adhesive forms strong, durable joints suitable for DIY, hobby, electronics and household fixes where quick adhesion is required.

Advantages

The clear epoxy provides rapid initial set (about 1 minute) while delivering long-term mechanical strength after full cure. The syringe packaging (2 x 12 ml) contains pre-measured components to simplify mixing and application for small to medium repairs. The adhesive bonds a variety of substrates including metal, glass, ceramics, wood and many plastics, offering versatility for multiple repair and assembly tasks. The cured material is durable and suitable for applications requiring a discreet, clear finish.

Suitable for

• Small household repairs on ceramics, glass and porcelain
• Bonding metal parts and light mechanical joins
• Model making, hobby projects and crafts
• Electronics repairs where a quick-setting adhesive is needed (non-structural)
• Wood repairs and minor furniture touch-ups

Key specifications

• Brand: Technicqll
• Model / MPN: C2-E358
• EAN: 5902051000358
• Format: 2 x 12 ml syringes
• Type: Two-component clear epoxy adhesive
• Setting time: Approximately 1 minute (initial set)

How to use

Ensure surfaces are clean, dry and free from dust, grease or loose particles before application. Dispense equal parts from each syringe and mix thoroughly until a uniform clear colour is achieved. Apply mixed adhesive to one surface, press parts together and hold or clamp until initial set (about 1 minute). Allow sufficient time for the adhesive to reach full cure according to ambient temperature and material — avoid stressing the joint until fully cured.

Usage recommendations

Use in a well-ventilated area and wear appropriate protective equipment such as gloves. Test adhesion on inconspicuous area or sample material when bonding unknown plastics. Store syringes in a cool, dry place and follow local disposal regulations for chemical waste.