Epoxy Metal Adhesive Technicqll E-396, 300 kg shear strength, 2x12 ml syringes

Technicqll E-396 is a two-component epoxy metal adhesive supplied in twin 12 ml syringes, formulated to create rigid, high-strength bonds for metal assemblies and repairs. The product is intended for applications requiring strong shear resistance and permanent fixation, delivering durable joints for automotive, industrial and DIY use. The cartridge format allows controlled dispensing of the resin and hardener for small to medium repair tasks and structural bonding where a resilient epoxy joint is required.

Advantages

The epoxy provides a high shear strength of 300 kg, ensuring secure connections under mechanical load. Its two-component composition cures to a hard, durable bond that resists vibration and mechanical stress. The syringe delivery supports precise mixing and application without excessive waste, and the cured material offers gap-filling capability for uneven metal surfaces. The formulation is suitable for bonding a range of metal substrates and for making structural repairs where a permanent, rigid joint is needed.

Suitable for (tasks / use cases)

• Bonding metal parts in automotive repairs and assemblies
• Structural fastenings and small metal fabrications
• Repairing metal housings, brackets and mounts
• Gap filling and reinforcement of corroded or worn metal surfaces
• General DIY metal assembly and maintenance

Key specifications

• Two-component epoxy system in 2 x 12 ml syringes
• Specified shear strength: 300 kg
• Rigid, durable cured bond suitable for mechanical loads
• Gap-filling capability for uneven surfaces
• Suitable for a variety of metal substrates

How to use

Prepare surfaces by removing dirt, rust, oil and loose coatings to ensure good adhesion. Dispense equal parts of resin and hardener from the dual syringes and mix thoroughly until a uniform color is achieved. Apply the mixed adhesive to one of the surfaces and assemble the parts, ensuring proper alignment. Clamp or fixture the assembly as required and allow the adhesive to cure undisturbed for the time recommended by the manufacturer. After full cure, excess material can be machined or filed if necessary.

Usage recommendations

For best results, work at moderate temperatures and avoid applying the adhesive to wet or frosted surfaces. Use mechanical fasteners in conjunction with the adhesive for joints that will be exposed to high dynamic loads or safety-critical applications. Follow personal protection guidelines when handling uncured epoxy components, including gloves and eye protection.