Epoxy Adhesive Technicqll E-402 2x12 ml, two-part standard epoxy glue

Technicqll E-402 is a two-part epoxy adhesive supplied in matched 2x12 ml cartridges. The product is formulated as a standard-strength epoxy resin system that cures after mixing resin and hardener, creating a durable, chemically resistant bond suitable for a wide range of repair and assembly tasks. The compact cartridge format is convenient for small repairs, hobby modelling and applications that require precise dispensing of adhesive.

Advantages

This epoxy provides reliable structural adhesion and chemical resistance after full cure. The two-component system ensures controlled working time and stronger bonds than typical single-component glues. Supplied in small 12 ml doses per component, the cartridges reduce waste and are suitable for controlled application on small parts. The cured adhesive offers good gap-filling properties and bonds effectively to metals, ceramics, glass and many plastics when surfaces are prepared correctly.

Suitable for

• Small household repairs and maintenance
• Scale modelling and hobby projects
• Bonding metal components and fittings
• Repairing ceramic and glass items
• Joining many common plastics (with surface preparation)

Key specifications

• Packaging: two-component cartridges, 2 x 12 ml
• Product type: standard-strength epoxy adhesive
• Application: structural bonding and small repairs
• Curing: chemical cure after mixing resin and hardener
• Cured properties: durable, chemical resistant, gap-filling

How to use

Dispense and mix equal parts of the two components thoroughly until a uniform colour is obtained, then apply the mixed adhesive to clean, dry surfaces. Fit parts together and hold or clamp until the adhesive develops initial handling strength. Full mechanical and chemical resistance is achieved after complete cure as specified by the manufacturer; ambient temperature and joint size affect cure time. Remove excess uncured adhesive with appropriate solvent before curing. Follow safety guidance when handling resin and hardener.

Usage recommendations

For best results, abrade and degrease bonding surfaces prior to application. Use in well-ventilated areas and wear suitable gloves. Test adhesion on inconspicuous area when bonding plastics to verify compatibility. Apply only the amount needed for the job to avoid unnecessary waste from mixed epoxy.