Thermal Adhesive Cartridge 300 ml Technicqll C2-R518 — heat-resistant up to 1200°C

Technicqll thermal adhesive cartridge 300 ml C2-R518 is a high-temperature adhesive designed for bonding and sealing applications that require resistance to extreme heat up to 1200°C. Supplied in a standard 300 ml cartridge for use with manual or pneumatic dispensing guns, this paste-like adhesive cures to form a stable joint or seal suitable for furnace components, exhaust systems, high-temperature insulation and various industrial maintenance tasks.

Advantages

This thermal adhesive offers sustained heat resistance up to 1200°C and maintains mechanical integrity under thermal cycling. The cartridge format enables controlled dispensing with standard caulking guns or applicators, reducing waste and improving application precision. The cured material provides good adhesion to metal, ceramic and some refractory surfaces, and is formulated to resist common high-temperature degradation mechanisms such as oxidation and softening.

Suitable for

• Repairing and sealing furnace linings and burners
• Sealing exhaust manifolds and high-temperature ducts
• Bonding ceramic or refractory insulation to metal supports
• Maintenance of industrial ovens, kilns and heat-treatment equipment

Key specifications

• Form: cartridge-dispenser paste suitable for 300 ml applicators
• Maximum temperature resistance: up to 1200°C after curing
• Typical substrates: metals, ceramics, refractories
• Application method: manual or pneumatic dispensing gun
• Curing: heat-curing to reach rated temperature resistance

How to use

Prepare surfaces by removing loose debris, oils and contaminants; for best adhesion, clean and, if appropriate, roughen metal surfaces. Load the 300 ml cartridge into a compatible dispensing gun and apply an even bead of adhesive to one surface. Join parts and allow the adhesive to cure through controlled heating according to the operating temperature profile required for the application. Ensure adequate ventilation when curing and avoid applying the product to wet or frozen surfaces.

Usage recommendations

For reliable performance, select a dispensing gun that provides steady pressure to ensure uniform flow from the 300 ml cartridge. Preheat components if necessary to accelerate curing and to avoid trapping moisture. Perform a small test joint to confirm adhesion and cure schedule on specific substrates before full-scale application. Follow workplace safety procedures, use suitable gloves and eye protection, and consult technical data sheets for detailed handling and storage instructions.