Adhesive Tytan Polymer Universal 40 ml – Tytan KLEJ PO-0.04, universal polymer adhesive in 40 ml cartridge

Tytan Polymer Universal Adhesive KLEJ PO-0.04 is a 40 ml polymer-based universal glue supplied in a compact cartridge for precision application. Formulated to bond a wide range of materials, this adhesive is suitable for repair, assembly and mounting tasks where reliable, long-lasting adhesion is required. The product is intended for indoor and short-term outdoor use on rigid and semi-rigid substrates and can be applied with standard cartridge applicators designed for 40 ml cartridges.

Advantages

The adhesive offers strong adhesion on various common substrates including plastics, metals, glass and ceramics, delivering mechanical strength and resistance to normal household stresses. Its polymer formulation provides good gap-filling properties and moderate flexibility after curing, reducing the risk of brittle failure at bonded joints. The 40 ml cartridge size enables controlled dispensing for small to medium repairs and installations, minimizing waste.

Suitable for

• Bonding plastics and many painted or unpainted metals
• Adhering glass and ceramic elements in fixtures and decorations
• Repairing household items, small furniture edges and trims
• Mounting trims, profiles and small construction substrates
• Assembly tasks in DIY, maintenance and light construction work

When it may not be suitable

This universal polymer adhesive is not intended for structural load-bearing applications where certified structural adhesives are required. It may not produce reliable bonds on certain low-energy plastics (for example some polyethylene or polypropylene grades) without surface pretreatment or a primer. Continuous immersion in water or prolonged exposure to aggressive chemicals can degrade the bond over time.

Key specifications

• Form: polymer-based adhesive in 40 ml cartridge
• Application temperature range: recommended ambient and substrate temperatures around typical indoor conditions (check manufacturer's instructions for exact limits)
• Cure characteristics: moisture-activated polymerisation with progressive skin formation and full cure depending on joint thickness and ambient humidity
• Consistency and properties after cure: flexible joint with gap-filling capacity and resistance to normal mechanical stresses
• Suitable substrates: plastics, metals, glass, ceramics and common construction materials

How to use

Prepare bonding surfaces by cleaning them from dust, grease, oil and loose particles. For non-porous or low-energy plastics, roughen the surface and consider using a compatible primer or mechanical fastening in addition to the adhesive. Cut the cartridge tip according to the desired bead size and apply the adhesive using a cartridge applicator. Press and align parts within the working time and secure if necessary until initial set. Allow full cure according to joint thickness and environmental conditions before placing the bonded assembly under load.

What to consider before purchase

• Confirm compatibility with the materials you plan to bond, especially low-energy plastics
• Consider required joint size and cure time based on application and environmental conditions
• Check whether the intended application requires a structural or certified adhesive instead of a universal polymer

Usage recommendations

Use in well-ventilated areas and follow the manufacturer’s safety instructions. Store cartridges in a cool, dry place and use within the recommended shelf life. For optimal results, ensure proper surface preparation and allow adequate curing time before stressing the joint.